Category: DIY electronics

In this post we will build a wireless home load controlling system using LinkIt ONE and Android mobile. Android mobile will have a client application to switch on/off

LinkIt ONE is a all in one IoT devboard from Media Tek. It contains every thing one may need to develop an IoT application. Some features of LinkIt

Visual studio: 20 years back (1995), when Microsoft first launched its visual studio 4.0 bundling its stand alone products Visual basic, visual C++ and foxpro, many jumped to

With Node-Red it is very easy to create work flows. Here will learn how to build a simple workflow to post the Serial output of Arduino (or any

Intelligent water heater is On/Off temperature controller. The controller will try to maintain the water in temperature in given range (min and max temperature). In this system user

Raspberry Pi is great tool for embedded engineers but it lacks ADC. One more draw back is all its IO’s are 3.3V level. On the other side Arduino

In this blog we will learn about shifting operation by developing a LED Chasing circuit. The circuit is very simple if you have a 8051 based development board

In some applications you require to change the clock rate of the MCU. consider that you implemented a LED pattern like in the video, and you require to

Today I just connected my ESP8266 (model:ESP-01) to Raspberry Pi (2)successfully. I just connected to check if the module is working or not. If your trying to do

In this blog we will see how to setup NAT on Raspberry Pi between eth0 and wlan0 sudo nano /etc/sysctl.conf add the following line at the end of