Category: ESP32

ESP32 supports many development platforms such ESP-IDF, MicroPython and Arduino. I had already shown how to interface servo with esp32 using ESP-IDF and MicroPython. In this post we

M5Stack has produced some amazing hardware. I recently got my hands on M5Stack Core2. Its compact, powerful and well built. It has plenty of Flash and PSRAM (16MB

We can control a servo using ESP IDF LEDC API. We have already seen how to do that here. The servo sweep program changes the angle of servo

ESP32 has three hardware UART controllers (Serial ports) , UART0, UART1 and UART2. All three UART controllers are independent and fully featured (configurable parity bit, baud rate etc.).

When Bluetooth stack is enabled in ESP-IDF, the default behavior is to connect to previously connected Bluetooth device. We can reset (erase) all the bonded devices data to

Maixduino is RISC-V based AI development board in Arduino UNO formfactor from sipeed. Main module in Maixduino is Sipeed M1, which is based on K210 RISC-V SoC. K210

We have already seen how to control a servo using esp32 here. In this post we will see how to control the servo using Wio terminal and the

Adafruit Circuit playground express board is designed for entry level hobbyist. It got a power full controller ( ATSAMD21 ARM Cortex M0 ) along with lot of on

ESP32 is fun to work with, once you got it into a network, you can do lot of things. We have seen how to make use it as

If you had observed, the default host name for TCP/IP adapter is espresiff (this name will appear in your router’s DHCP client list). For DIY projects, this is